5 Series E39 520i (M52) SAL
13 90 500
Replace tank vent valve (M52)
Interrogate fault memory of DME control unit. Switch off
ignition.
Unfasten plug connection (1).
Unfasten vent hose (2) by releasing lock, refer to next operation.
Pull tank vent valve upwards to remove from bracket.
Press down locking bracket (2), remove hose.
Remove hose (1).
Installation:
Replace hose (1).
Interrogate fault memory of DME-control unit, check faults in
memory then cancel fault memory.
RA Replace tank vent valve (M52)
BMW AG - TIS
30.01.2013 07:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -