5 Series E39 520i (M52) SAL
24 10 002
Removing and installing / replacing position
switch (A4S 270R/310R)
Move selector lever into position "P".
Brace clamping bush (1) and loosen nut (2).
Installation:
Adjust shift lever,
refer to 24 00 007.
Hold cable (3) on hexagon (1) and loosen nut (2).
Pull cable (3) somewhat toward rear and remove from bracket.
Installation:
Tightening torque,
refer to Technical Data 25 16 1AZ.
Slacken nut (1).
Remove shift lever (2).
Installation:
Tightening torque,
refer to Technical Data 24 51 1AZ.
Disconnect cable connector, unfasten screw and remove
connector bracket.
RA Removing and installing / replacing position switch (A4S 270R/310R)
BMW AG - TIS
30.01.2013 08:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
