5 Series E39 520i (M52) SAL
Insert compression springs (1) (24 x) in piston.
Place spring retainer (1) on compression springs.
Place new snap ring (2) on spring retainer (1).
Press down spring retainer (1) with special tool
24 2 311/24 2 312 until groove for snap ring (2) is free.
Caution!
Do not press spring retainer (1) down too far - risk of damage.
Insert snap ring (2) in groove.
Remove special tool 24 2 311/24 2 312.
Secure shim (1) with Vaseline.
Coat new plain compression rings (2) with petroleum jelly and
insert in grooves.
RA Sealing intermediate plate (A4S 270R/310R)
BMW AG - TIS
30.01.2013 08:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -