5 Series E39 520i (M52) SAL
Unfasten nut.
If necessary, expand the swivel bearing with special
tool 31 2 200 and press downwards.
Remove tension strut.
Installation:
Press swivel bearing up to stop and note the mark indicating
the installation position.
Replace self-locking nut. Tightening Torque,
refer to Technical Data 31 21 4AZ.
RA Removing and installing/replacing both tension struts
BMW AG - TIS
30.01.2013 09:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -