5 Series E39 520i (M52) SAL
Remove left and right trim panels.
Unfasten left and right shock absorbers from wheel carrier.
Installation:
Insert bush (1) in the bore on the wheel carrier.
Tightening torque,
refer to Technical Data 33 52 1AZ.
Remove rear axle carrier from body by unfastening bolts (1) at left
and right and lowering rear axle.
Installation:
The rubber-coated detent plate (2) must be installed at the
rear in the driving direction.
Tightening torque,
refer to Technical Data 33 33 3AZ.
RA Removing and installing complete rear axle carrier
BMW AG - TIS
30.01.2013 10:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -