5 Series E39 520i (M52) SAL
35 31 000
Removing and installing / replacing clutch
pedal
Remove lower left trim panel from instrument panel.
Remove the clutch pedal switch .
Remove retainers.
Push out the bolts (1) and remove the clutch pedal.
Installation:
Fit compression spring (2),
also refer to 35 00... layout.
Installation:
Check bearing bushes (1) and replace if necessary.
Apply a light coat of grease to bearing bushes (1) and bore
(2),
refer to BMW Service Operating Fluids.
RA Removing and installing / replacing clutch pedal
BMW AG - TIS
30.01.2013 11:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -