5 Series E39 520i (M52) SAL
Arrange individual welding spots so close together on connection
point for C-pillar that a continuous seam is created.
Caution!
Locate welding spots in a way which prevents distortion
caused by heat elongation. Ensure that welded areas have
cooled sufficiently.
Danger of distortion!
Braze connection point of cowl panel and roof gutter and mark
with points.
Weld connection point of roof gutter, lamp carrier and rear apron.
Note:
Following work steps apply to M5 only.
RA Replacing the rear left side panel
BMW AG - TIS
30.01.2013 12:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -