5 Series E39 520i (M52) SAL
Version with Park Distance Control (PDC):
Pull bumper backwards slightly and remove cable grommet and
cable.
Pull bumper backwards to remove.
Installation:
Mount seal (2) on shock absorber (1)
Fit protective cap (3) to right shock absorber (1).
Ideal adjustment:
Gap (A) should be uniform down full length between bumper and
aperture in body.
Dimension (A) = 5
±
1 mm
Loosen left/right inner nuts and adjust height of bumper.
For tightening torque, refer to Technical Data 51 12 2AZ
RA Removing and installing complete rear bumper
BMW AG - TIS
30.01.2013 12:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -