5 Series E39 520i (M52) SAL
Remove blade (1) and replace.
Installation:
Make sure blade (1) is correctly seated on locating points (2).
Open pliers (3).
Slide optical fibre (1) into cutting device (2) until insulation of
optical fibre (1) butts against clamping device.
Close pliers (3) fully and keep closed.
Remove optical fibre (1).
RA Cutting off, stripping insulation and cutting optical fibres to length
BMW AG - TIS
30.01.2013 16:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -