5 Series E39 520i (M52) SAL
64 11 208
Replacing heater core (automatic A/C)
Unfasten clip from left air duct, twist air duct and pry out.
Installation:
Fit air duct to end wall, twist and insert at bottom of microfilter.
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Unfasten water hoses (1 to 3) on the end wall. Carefully blow
through lines to remove remaining coolant from heating element.
Installation:
Filling and bleeding the cooling system,
RA Replacing heater core (automatic A/C)
BMW AG - TIS
02.02.2013 15:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -