5 Series E39 520i (M52) SAL
A:
Screw in output spindle (1) up to stop (2) and then screw back
1 turn.
B:
Push backrest adjustment gearing (3) onto backrest frame.
If necessary, press backrest frame down a little.
Fit retainers.
Turn output spindle (1) until backrest adjustment gearing (2) can
be pushed on without tension (do not press backrest frame down
under any circumstances).
If necessary, readjust with backrest adjustment shaft.
Fit retainers.
Insert backrest adjustment shaft (1) into backrest adjustment
gearing (2) (other end with square section (3) is not fitted yet).
Place backrest frame on a flat surface. Measure distance (X) on
left and right.
Permitted deviation on left and right sides: max. 2 mm.
If necessary, adjust backrest adjustment gearing with square
section of backrest adjustment shaft.
RA Removing and installing/replacing drive unit for head restraint adjustment (comf
BMW AG - TIS
02.02.2013 16:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -