5 Series E39 520i (M52) SAL
67 63 511
Removing and installing / replacing wiper
motor
Remove complete wiper console,
refer to 61 61 270
Unfasten nut and remove drive crank with linkage.
Unfasten screws and remove wiper motor from console.
Installation:.
Install wiper motor together with console. Fit connector and
run wiper in rest position. Reinsert connector.
Align wiper linkage in one line, attach drive crank to wiper
shaft and tighten down. Comply with tightening torque,
refer to Technical Data 6161 4AZ
Refit the connector.
RA Removing and installing / replacing wiper motor
BMW AG - TIS
02.02.2013 16:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -