5 Series E39 520i (M52) TOUR
Unlock and detach cable plug (1) from position switch.
Unclip cable from transmission housing.
Release oil cooler line clamp on crankcase and oil sump.
Release screw connection on oil cooler line.
Installation:
Replace sealing ring (1).
Tightening torque: 17 22 5AZ
.
Release screw connection on oil cooler line at rear.
Installation:
Replace seal.
Tightening torque: 17 22 6AZ
.
RA Removing and installing automatic transmission (A4S 310R)
BMW AG - TIS
03.02.2013 17:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
