5 Series E39 520i (M52) TOUR
24 12 106
Replacing radial seal for manual shift valve
shaft (A5S 310Z)
Note:
After completing these operations, check the transmission
oil level and top up if necessary,
refer to 00 11 239 (A5S 310Z)
Move selector lever to "P" setting.
Remove underbody protection from transmission.
Brace clamping bush (1) and loosen nut (2).
Installation:
Adjust shift lever,
refer to 24 00 007
Brace cable on hex head (1) and loosen nut (2).
Remove cable from bracket.
Installation:
Tightening torque,
refer to Technical Data 25 16 1AZ.
RA Replacing radial seal for manual shift valve shaft (A5S 310Z)
BMW AG - TIS
03.02.2013 17:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
