5 Series E39 520i (M52) TOUR
Unfasten screw and remove.
Installation:
Insert locking nut (1) in recess on rear axle carrier and tighten
down screw.
Tightening Torque,
refer to Technical Data 33 32 20AZ.
Support wheel carrier with workshop hoist.
Unfasten nut, unfasten screw and remove swinging arm.
Installation:
Replace nut.Tightening Torque,
refer to Technical Data 33 32 22AZ.
RA Removing and installing or replacing left or right swinging arm (touring)
BMW AG - TIS
03.02.2013 19:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
