5 Series E39 520i (M52TU) TOUR
Installation:
Check dowel sleeve for damage and correct installation
position.
Installation:
Position of dowel sleeve (1) in dual-mass flywheel is
identified by two notches next to associated bolt hole.
Installation:
Clean thread and install new micro-encapsulated screws.
Tightening torque 11 22 1AZ.
RA Removing and installing or replacing flywheel (M52 / S52 / M52TU / M54 / S54)
BMW AG - TIS
06.02.2013 09:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -