5 Series E39 520i (M52TU) TOUR
Observe position of vacuum connection. Turn and remove
pressure regulator.
Installation:
Replace sealing rings (1 and 2). Ensure sealing faces are
clean.
Installation:
Allow lug on circlip to engage in recesses of injector tube.
Read out fault memory of DME control module, check stored fault
messages, rectify faults, cancel fault memory.
RA Replacing fuel pressure regulator (M52TU)
BMW AG - TIS
06.02.2013 10:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -