5 Series E39 520i (M52TU) TOUR
Lift off cover.
Unfasten retaining screws on torque converter (3 screws) with
special tool 24 1 110.
Installation:
Only use original screws.
Tightening torque,
refer to Technical Data 24 40 1AZ.
Protect torque converter from slipping out. To do this, insert
special tool 24 4 131/ 24 4 134 in opening of transmission
housing and clamp torque converter in place.
Unfasten screws.
Pull transmission of engine towards rear and lower.
Installation:
Tightening torque,
refer to Technical Data 24 00 1AZ.
RA Removing and installing automatic transmission (A5S 325Z)
BMW AG - TIS
06.02.2013 16:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -