5 Series E39 520i (M52TU) TOUR
51 12 000
Removing and installing entire rear bumper
(touring)
Note:
Version with trailer coupling:
Remove finisher strip.
Remove center body molding from rear bumper,
refer to 51 12 432
Unfasten left/right expanding rivets and lift wheel arch finisher (1)
to one side to remove.
Version with Park Distance Control (PDC):
Open right lid (1), unfasten screw (2) and turn subwoofer
speaker (3) toward front.
Version with Park Distance Control (PDC):
Lift insulating mat.
Unfasten cable connector (1).
Release connector (2), pull off and expose cable.
RA Removing and installing entire rear bumper (touring)
BMW AG - TIS
06.02.2013 21:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -