bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing Left Or Right Rear Side Window (touring)|Page 2440 > < 5 RA Removing And Installing Left Or Right Rear Side Window (touring)
Page 2
background image

Unfasten screws (1) and take off bracket (2) for roller cover.

Remove insulating mat (1).

Pull off edge protector on side window.

Note:

Carefully pull off in corner (1) (danger of damage to edge
protector).

Left only:

Remove connector (1) from side window antenna.

Secure connector and cable to side window with adhesive tape
(danger of damage).

Installation:

Route cable (2) in recess.

Version with TV or navigation system:

If necessary, pull off front connector (beside the C pillar) and
secure wire to side window with adhesive tape.

RA  Removing and installing left or right rear side window (touring)

BMW AG - TIS

06.02.2013  22:41

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

5 RA Removing And Installing Left Or Right Rear Side Window (touring)|Page 2440 > < 5 RA Removing And Installing Left Or Right Rear Side Window (touring)