bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

47 Floor-lugg.comp.-eng.comp.tr.panels > < 1 RA Removing And Installing _ Replacing Finisher For Rear Apron At Top (touring)
Page 2
background image

Open left/right lid (1) and remove.

Unfasten expansion rivets (2) and unclip finisher (3) for rear apron
upward.

Installation:

If necessary, replace defective clips (1).

RA  Removing and installing / replacing finisher for rear apron at top (touring)

BMW AG - TIS

06.02.2013  22:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

47 Floor-lugg.comp.-eng.comp.tr.panels > < 1 RA Removing And Installing _ Replacing Finisher For Rear Apron At Top (touring)