5 Series E39 520i (M54) SAL
VS-24/Stocker
Baugruppe/Group: 11
11 04 02 (867)
Weltweit
all countries
Datum/Date:
05/2002
Update: 06/2002
M54 RHD - Exhaust manifold gasket with heat shield
E36, E39, E46 / M54
Situation:
On RHD vehicles, buzzing noises can occur in the range 1000 - 1200 rpm.
These buzzing noises are caused by the exhaust manifold gasket with heat shield making
contact with adjacent components.
Affected vehicles:
E36/7, E39, E46 with M54 engine and RHD
Manufacturing period: start of series up to and including 04/2002
Procedure:
In case of customer complaint, both exhaust manifold gaskets with heat shield must be
replaced with the modified version with damping pieces.
- Remove the exhaust manifold, as described in repair instructions 11 62 140.
- Remove lower section of steering spindle, please refer to repair instructions 32 31 070.
- On vehicles with reinforcement plate (E46 coupé from 11/99, E46 convertible from start of
series production and all E46 from 12/2000 except 4-wheel drive), comply with notes in
repair instructions 51 71 374.
- Insert damping pieces in existing holes (please refer to Figs. 1 and 2), making sure the
damping pieces are correctly located.
Fig. 1: Fixture for damping piece at front of cylinder head
Fig. 2: Fixture for damping piece at rear of cylinder head
Important!
As the damping pieces are smaller in diameter than the holes in the cylinder head
SI M54 RHD - Exhaust manifold gasket with heat shield E36 E39 E46 M54
BMW AG - TIS
07.02.2013 18:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -