5 Series E39 520i (M54) SAL
Disconnect and cover battery negative lead.
Remove complete exhaust system.
Remove underbody protection.
Remove heat shield (1).
Remove heat shield (1).
Detach stabilizer link (1) from stabilizer bar (2) on left and right -
grip with open-end wrench.
Tightening torque, 31 35 11AZ.
Note:
Replace self-locking nuts.
RA Removing and installing automatic transmission (A5S 360R / 390R, M52TU/M54)
BMW AG - TIS
08.02.2013 00:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -