5 Series E39 520i (M54) SAL
34 33 505
Removing and installing / replacing the brake
unit
After finishing work:
Bleed brake system.
Remove microfilter housing (1) and air duct (2).
Suck the brake fluid out of the expansion tank. For this purpose,
use only a vacuum pipe that is exclusively used for removing
brake fluid.
Remove supply hose (1) to clutch master cylinder.
Lift expansion tank out of master brake cylinder by tilting
sideways.
Installation:
Push the expansion tank vertically onto the master brake
cylinder.
RA Removing and installing / replacing the brake unit
BMW AG - TIS
08.02.2013 03:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -