5 Series E39 520i (M54) SAL
Offset connection point in side panel with tool.
Produce reinforcement plates for the water drain.
Width = min. 60 mm.
At least 30 mm overlap on each side.
Cut out side panel replacement section roughly from a new part, fit
in and cut out to final size.
Clean and coat mating surfaces on replacement section with zinc
dust paint.
RA Replacing left rear side panel (partial replacement)
BMW AG - TIS
08.02.2013 05:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -