5 Series E39 520i (M54) SAL
Remove right intake filter housing.
M47 only:
Detach rubber gaiter (3) in direction of arrow from air hose (1).
Pull off hose (4).
Detach rubber gaiter (3) first from snorkel (2) then from intake
neck (5) and remove.
All:
Disconnect plug connection (4) in direction of arrow.
Release bolts (1).
Remove lines (2) and (3).
Installation:
Replace sealing rings.
Observe tightening torque, 64 52 1AZ
.
Compressor mounting with 4 screws:
Note:
Secure A/C compressor against falling out.
Release screws.
Remove A/C compressor towards bottom.
Compressor mounting with 3 screws:
Note:
Secure A/C compressor (2) against falling out.
Release screws (1) and remove A/C compressor (2).
RA Removing and installing/replacing complete A/C compressor
BMW AG - TIS
08.02.2013 10:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -