5 Series E39 523i (M52) SAL
24 11 055
Removing and installing/sealing transmission
extension (A4S 270R/ 310R)
Remove propeller shaft,
refer to 26 11 000.
Remove output flange.
Hold output flange with special tool 23 0 020.
Unscrew collar nut with a wrench socket.
Pull off output flange.
Pull plug off of speed sender.
Remove transmission extension.
Unscrew bolts with special tool 24 5 180.
Caution!
Bolts have inch threads.
Remove transmission extension and seal.
Locate seal in position with grease (Vaseline).
Mount transmission extension.
Guide operating rod (1) for parking lock into pawl (2).
Caution!
Only use bolts with inch threads.
Tightening torque,
refer to Technical Data 24 11 1AZ.
Mount and bolt output flange.
Tightening torque,
refer to Technical Data 24 21 1AZ.
RA Removing and installing/sealing transmission extension (A4S 270R/ 310R)
BMW AG - TIS
11.02.2013 01:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -