5 Series E39 523i (M52) SAL
51 24 050
Removing and installing/replacing lock
(locking cylinder) for trunk lid set
Remove trim for bottom of trunk lid,
refer to 51 49 005
Unfasten cable tie and disconnect plug connection.
Lift out actuating rod (1).
Unfasten nut and remove connection (2).
Installation:
Check that actuating rod (1) is correctly seated.
Locking section (2) must be fitted to center of body aperture.
Installation:
Perform function check with trunk lid open.
RA Removing and installing/replacing lock (locking cylinder) for trunk lid set
BMW AG - TIS
11.02.2013 07:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -