5 Series E39 523i (M52) TOUR
With pressure connection on injector strip:
Remove dust cap (1).
Connect special tool 13 5 220 to pressure sensor on DIS.
Remove hose for crankcase ventilation from cylinder-head cover if
necessary. After installing special tool, reinstall hose on cylinder-
head cover.
Fit special tool 13 5 220 to injector strip and tighten down firmly to
ensure O-ring seals in special tool.
Unscrew non-return valve (1) on special tool to ensure that valve
in fuel rail is closed.
Switch on engine and screw in non-return valve (1) on special tool
until pressure gauge produces a pressure reading. Never screw in
non-return valve up to mechanical stop, as the valve in the injector
strip could be damaged.
Removing special tool:
Switch off engine.
Screw out non-return valve again completely, disconnect special
tool from injector strip, catch exiting fuel residues and dispose off.
RA Checking fuel delivery pressure of fuel pump (M20,M30,M40,M42,M43, M44,M52,S38,S
BMW AG - TIS
12.02.2013 13:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -