5 Series E39 523i (M52) TOUR
24 13 706
Replacing bearing on transmission extension
(A5S 310Z)
(output flange removed)
Lift out circlip (1).
Remove ball cage (2).
Heat transmission extension with a hot air blower around the inner
bearing race to approx. 80
°
C.
Press out outer bearing race (3).
Remove ball cage (4).
Installation:
Heat case once again.
Install ball cage (4).
Press in outer bearing race (3).
RA Replacing bearing on transmission extension (A5S 310Z)
BMW AG - TIS
12.02.2013 15:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
