bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Adjusting Luggage Compartment Loading Floor (pull-out) (touring)|Page 2419 > < 6 RA Replacing Luggage Compartment Floor Trim Panel (rear) (touring)
Page 1
background image

51 47 111

Adjusting luggage compartment loading floor
(pull-out) (touring)

Remove and install trim panel for luggage compartment
floor, front,

refer to 51 47 131.

Remove and install luggage compartment loading floor,

refer to 51 47 112.

Loosen screws (2) in left/right rails (1) (do not unfasten). 

(Components must still be able to be moved easily.)

Loosen screws (1) in left/right roller blocks (2) (do not unfasten).

(Components must still be able to be moved easily.)

Loosen screws (1) on "middle" roller block (3) (do not unfasten).

Loosen screws (2) on adjusting bracket and twist out approx. 2
mm (risk of damage).

(Components must still be able to be moved easily.)

RA  Adjusting luggage compartment loading floor (pull-out) (touring)

BMW AG - TIS

12.02.2013  22:12

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Adjusting Luggage Compartment Loading Floor (pull-out) (touring)|Page 2419 > < 6 RA Replacing Luggage Compartment Floor Trim Panel (rear) (touring)