5 Series E39 523i (M52) TOUR
Note:
Position of butylene tape (1) on inner door plate.
Note:
Position of butylene tape (1) on sound insulation (2).
Caution!
When working with adhesive cleaners in enclosed rooms:
Ensure room is well ventilated.
The adhesive areas must be dry and free from dust and
grease.
After cleaning, do not touch the adhesive areas with bare
hands.
If necessary, clean the specified adhesive area with adhesive
cleaner (sourcing reference: BMW Parts Service).
Air drying time: 1 minute
Lay butylene tape with
∅
6 mm (sourcing reference: BMW Parts
Service) in specified adhesive area.
Heat butylene tape (hot air blower) and press down firmly on
sound insulation all around.
Contact pressure with hand roller: approx. 30 N/cm
2
Manual contact pressure: approx. 10 N/cm
2
Note:
Firm thumb pressure has approx. 50 N/cm
2
RA Removing and installing/replacing sound insulation in rear door, left or right
BMW AG - TIS
12.02.2013 22:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -