5 Series E39 523i (M52TU) SAL
Unscrew and remove splash guard.
Remove transmission, refer to MG 23 / MG 24.
Note:
M52 / S52
The water drain plug is located on the exhaust side between
cylinders 4 and 5 in the engine block (as illustrated).
M52TU / M54
The water drain plug is located on the exhaust side on
cylinder 2 in the engine block.
Drain off coolant and dispose of correctly.
Installation:
Replace seal.
Tightening torque 11 11 5AZ.
Remove radiator.
Take off cover.
RA Removing and installing engine (M52 / S52 / M52TU / M54)
BMW AG - TIS
14.02.2013 11:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -