5 Series E39 523i (M52TU) SAL
Installation:
Install regulator switch with assembly cap.
Initially tighten nuts of regulator switch.
Installation:
Remove assembly cap (1).
Installation:
Fit supplied cover cap (2).
Tighten down nuts and ground screw of regulator switch.
Tightening torque, 12 32 1AZ .
Bosch alternator:
Release screws on cover.
RA Replacing voltage regulator (Valeo/Bosch)
BMW AG - TIS
14.02.2013 12:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -