5 Series E39 523i (M52TU) SAL
Release screw (1) and remove exhaust bracket.
Installation:
After complete installation of exhaust system, align exhaust carrier
so that it is free from tension. To do so, slacken screws (2).
Support exhaust system with jack and special tool 31 2 220 and
secure against falling out.
Release hexagon screws (1 and 2) and remove reinforcement
plate (3). Front reinforcement plate is connected to exhaust
system via rubber mounts.
Release hexagon nuts (1) of front rubber mount on rear muffler.
RA Removing and installing complete exhaust system (M52TU)
BMW AG - TIS
14.02.2013 13:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
