5 Series E39 523i (M52TU) SAL
Remove heat shield (1).
Brace clamp section (1) and loosen nut (2).
Installation:
Adjust shift lever,
refer to 24 00 007.
Brace cable on hex head (1) and loosen nut (2).
Installation:
Tightening Torque,
refer to Technical Data 25 16 1AZ.
Unlock cable connector and remove.
Unclip cable from transmission case.
RA Removing and installing automatic transmission (A5S 310Z)
BMW AG - TIS
14.02.2013 14:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
