5 Series E39 523i (M52TU) SAL
Grip propeller shaft.
Release nuts.
Tightening torque, 26 11 6AZ.
Bend propeller shaft downwards at center bearing (1).
Detach propeller shaft from transmission output flange and tie
back to side on vehicle underbody.
Grip clamping sleeve (1).
Release nut (2).
Note:
Adjust selector lever.
Grip cable (1) at hexagon (2).
Release nut (3).
Tightening torque, 25 26 1AZ.
Pull cable (1) out of holder.
Unlock and remove cable connector (1).
Unclip cable (2) from transmission housing.
RA Removing and installing automatic transmission (A5S 360R / 390R, M52TU/M54)
BMW AG - TIS
14.02.2013 14:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
