5 Series E39 523i (M52TU) SAL
Slacken nut (1).
Remove shift lever (2).
Installation:
Tightening torque,
refer to Technical Data 24 51 1AZ
Unfasten screws and remove position switch from the manual shift
valve shaft.
Installation:
Note retaining pin (1).
Remove radial seal with special tool 24 5 260.
Installation:
Fit special tool 24 5 490 to the manual shift valve shaft.
Coat sealing lip of new radial seal (1) with transmission oil.
Slide radial seal onto manual shift valve shaft.
RA Replacing radial seal for manual shift valve shaft (A5S 310Z)
BMW AG - TIS
14.02.2013 14:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
