5 Series E39 523i (M52TU) SAL
24 34 863
Replacing pressure regulator for system
pressure (AS5 325Z)
Note:
After completing work, top up ATF level.
Check/top up fluid level in automatic transmission,
refer to 00 11 500.
Shift unit removed.
Remove and install shift unit,
refer to 24 34 010.
It is absolutely essential to use the approved automatic
transmission fluid in this automatic transmission,
refer to BMW Operating Fluids MG24.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Disconnect plug (1) from pressure regulator (2) for system
pressure.
Unscrew bolt (1).
Remove retaining plate (2).
Remove pressure regulator (3) for system pressure.
Installation:
Coat new pressure regulator (3) for system pressure with
ATF.
RA Replacing pressure regulator for system pressure (AS5 325Z)
BMW AG - TIS
14.02.2013 14:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
