5 Series E39 523i (M52TU) SAL
31 21 180
Replacing front wheel bearing (wheel hub)
(Basis)
Caution!
Bearing cannot be dismantled.
Do not wash out bearings.
Remove brake disk (brake line remains connected),
refer to 34 11 220.
Remove ABS impulse sensor.
Remove stabilizer link from stabilizer,
refer to 31 35 005.
Unfasten nut.
Installation:
Use washer (1). Tapered spigot and bore both free of grease.
Replace self-locking nut.
Brace on hexagon socket if necessary.
Tightening Torque,
refer to Technical Data 32 21 3AZ.
Press off track rod with special tool 31 2 240.
RA Replacing front wheel bearing (wheel hub) (Basis)
BMW AG - TIS
14.02.2013 15:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
