5 Series E39 523i (M52TU) SAL
34 21 320
Removing and installing or replacing both
rear brake disks
Caution!
If the thickness of the brake disks drops below the minimum
thickness (MIN TH ), these disks must be replaced.
Always replace brake disks in pairs.
If the brake disks are replaced, you must also fit new brake
linings.
Remove wheels.
If necessary, remove and clean brake linings.
E65 and E66: Release parking brake (pushbutton switch on left
next to steering wheel).
After completing tasks, adjust handbrake.
(Not for E65 and E66)!
Release screws (1), remove brake caliper and tie up.
Note:
Brake hose remains connected.
Installation:
Tightening torque 34 21 3AZ.
Unscrew bolts and take off brake disk.
Installation:
Tightening torque 34 21 1AZ.
RA Removing and installing or replacing both rear brake disks
BMW AG - TIS
14.02.2013 17:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
