5 Series E39 523i (M52TU) SAL
34 41 120
Removing and installing / replacing both
handbrake Bowden cables
Adjust handbrake after completing work,
refer to 34 10 014
Removing spreader mechanisms,
refer to 34 41 250
Removing exhaust assembly,
refer to 18 00 020
Remove the propeller shaft completely,
refer to 26 11 000
Lift out cover caps (1) and unfasten screws. Unclip rubber gaiter
(2).
Unfasten bolt and remove finisher.
Installation:
Tab for mounting clip may not be damaged.
RA Removing and installing / replacing both handbrake Bowden cables
BMW AG - TIS
14.02.2013 17:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
