bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing _ Replacing Both Pipes (air Lines) From Distributor Bloc|Page 1891 > < 2 RA Routing Of Tubes (air Lines)|Page 1889
Page 1
background image

37 13 060

Removing and installing / replacing both
pipes (air lines) from distributor block to
spring strut shock absorber unit

Caution!

In area of air line connections, extreme cleanliness must be
ensured during removal and installation. 

Even small dirt particles can cause leakage in the system.

Remove wheels,

refer to 36 10 300.

Remove wheel arch trim.

Remove left, right and rear luggage compartment trim panels.

Unfasten line on left and right air spring struts.

Installation:

refer to 37 13 ... Notes on assembly.

RA  Removing and installing / replacing both pipes (air lines) from distributor bloc

BMW AG - TIS

14.02.2013  18:32

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing _ Replacing Both Pipes (air Lines) From Distributor Bloc|Page 1891 > < 2 RA Routing Of Tubes (air Lines)|Page 1889