5 Series E39 523i (M52TU) SAL
Unfasten lines on distributor block and cut through cable tie down
side of wiring harness. Cut through line beside rubber grommet
and pull out of grommet.
Installation:
Insert new line through rubber grommet as far as white mark.
Secure line with cable tie,
refer to 37 13 ... Routing of tubes.
refer to 37 13 ... Notes on assembly.
Install lines with identical colors.
RA Removing and installing / replacing both pipes (air lines) from distributor bloc
BMW AG - TIS
14.02.2013 18:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
