Removing and Installing Top Rear Panel on Front Seat Backrest (Luxury)
Note:
The operation "Replacing complete top of rear panel on front
seat back-rest" ends here.
Only replace:
Unscrew nuts.
Using a flat drill, pierce a hole on left/right.
(A) approx. 16 mm
(B) approx. 18 mm
Lift out bottom left / right cover (1) with 3 mm dia. cotter pin driver
(2).
RA Removing and installing/replacing top rear panel on front seat backrest (luxury
BMW AG - TIS
14.02.2013 21:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
