5 Series E39 523i (M52TU) TOUR
Detach steering spindle from steering gear; this operation is
described in the section Removing and installing steering gear.
Remove vane pump for power steering unit (lines remain
connected).
Note:
For improved access, unfasten reservoir for power steering unit if
necessary.
Loosen top and unfasten bottom of left and right engine mounts.
If necessary, remove oil pipes from oil pan.
Brace front axle support with special tool 00 2 030 in
conjunction with special tool 31 2 220.
Note:
When lowering front subframe, do not remove steering box from
subframe.
Unfasten screw connection on front axle support and lower the
front axle support.
These operations are described in the section Replacing front axle
support.
RA Removing and installing, sealing or replacing oil sump (M52 / M52TU / M54)
BMW AG - TIS
16.02.2013 04:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
