5 Series E39 523i (M52TU) TOUR
Support transmission with special tools 00 2 030 / 24 5 301 /
24 5 305 .
Release screws.
Tightening torque, 24 71 1AZ/2AZ.
Remove cross-member (1).
Release screws.
Tightening torque, 26 11 1AZ.
Installation:
Replace self-locking nuts.
Grip propeller shaft and release nuts.
Tightening torque, 26 11 6AZ.
Bend propeller shaft downwards at center bearing (1). Detach
propeller shaft from transmission output flange and tie back to
side on vehicle underbody.
RA Removing and installing or replacing transmission extension housing (A5S 360R /
BMW AG - TIS
16.02.2013 07:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
