5 Series E39 523i (M52TU) TOUR
Version 2 with spring washer:
Remove spring washer (1).
Installation:
Note installation direction of spring washer (1).
Remove output flange (2).
Installation:
Replace sealing ring in output flange (2).
Withdraw radial seal (1) with special tool 00 5 010 .
Release screws on transmission extension housing (1).
Tightening torque, 24 11 1AZ.
Carefully pull off transmission extension housing (1).
Replace gasket between transmission housing (1) and end cover.
Caution!
Existing shim (2) remains fitted and is not recalculated.
RA Removing and installing or replacing transmission extension housing (A5S 360R /
BMW AG - TIS
16.02.2013 07:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
