bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing Oil Strainer In Shift Unit (A4S 270_ 310R) > < 1 RA Removing And Installing _ Sealing Oil Pump Housing (A5S 310Z)|Page 1335
Page 1
background image

24 31 151

Removing and installing/replacing
transmission oil screen (A5S 325Z)

Note:

After completing work, top up ATF level.

Check/top up fluid level in automatic transmission,

refer to 00 11 500.

Transmission oil sump removed.

Remove and install transmission oil sump,

refer to 24 11 003.

It is absolutely essential to use the approved automatic
transmission fluid in this automatic transmission,

refer to BMW Operating Fluids MG24.

Failure to comply with this requirement will result in serious
damage to the automatic transmission!

Release screws (1).

Pull transmission oil screen (2) towards bottom and remove.

Installation:

Coat sealing ring with ATF.

Tightening Torque,

refer to Technical Data 24 31 2AZ.

RA  Removing and installing/replacing transmission oil screen (A5S 325Z)

BMW AG - TIS

16.02.2013  07:46

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing Oil Strainer In Shift Unit (A4S 270_ 310R) > < 1 RA Removing And Installing _ Sealing Oil Pump Housing (A5S 310Z)|Page 1335