bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Programming_replacing Control Unit > < 10 RA Replacing Pulse Generator (output Speed) (A5S 325Z)
Page 1
background image

24 34 880

Replacing pulse generator (turbine speed)
(A5S 325Z)

Note:

After completing work, top up ATF level.

Check/top up fluid level in automatic transmission,

refer to 00 11 500.

Transmission oil sump removed.

Remove and install transmission oil sump,

refer to 24 11 003.

Remove and install transmission oil screen,

refer to 24 31 151.

Remove and install shift unit,

refer to 24 34 010.

It is absolutely essential to use the approved automatic
transmission fluid in this automatic transmission,

refer to BMW Operating Fluids MG24.

Failure to comply with this requirement will result in serious
damage to the automatic transmission!

Unscrew bolt (1).

Withdraw pulse generator (2).

Pull off connector (3).

Installation:

Tightening Torque,

refer to Technical Data 24 34 8AZ.

RA  Replacing pulse generator (turbine speed) (A5S 325Z)

BMW AG - TIS

16.02.2013  07:56

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Programming_replacing Control Unit > < 10 RA Replacing Pulse Generator (output Speed) (A5S 325Z)